点击图片查看大图
1.P41系列管道支架采用热轧低碳钢制作，表面镀锌处理，壁厚为2.5mm，标准长度为3米或6米。
P41 Series are manufactured from hot-rolled low-carbon steel with galvanized finish. Wall thickness is 2.5mm and standard length is 3m/6m
2.P41系列管道支架作梁作用时，其集中荷载等于均荷载乘以0.5，其挠度等于均布荷载的挠度乘以0.8。
When P41 Series are used as beam, multiply uniformly distributed lod from th table by 0.5 for concentrated load and corresponding deflection by 0.8
3.P41系列管道支架可根据客户需求采用电镀锌，热浸镀锌，粉体涂装（喷塑），不锈钢等不同表面处理和材质进行定制，订货时需说明。
P41 Series are also available in galvanized, HDG, EP, stainless steel on special order.
4.P41系列管道支架可制成T型，安装时可不再打孔，其均布荷载为正常支架荷载的0.85。
P41 Series can be formed to "T" shape and no additional boring is required during installaion, but multiply load from the table by 0.85.
若客户认为上表中所列荷载过高，也可提供壁厚2mm，1.5mm的支架，荷载与售价也相应降低。
| 材质 | Q235 | 产地/厂家 | 宝钢 |
| 高度 | 220mm | 厚度 | 2.5（mm） |
| 宽度 | 410（mm） | 品名 | 冷弯槽钢（mm） |
